PCB Hand Drill
Handmade PCBs are common in electronics but drilling the component holes in PCB is essential and troublesome. However, this PCB Hand Held Drill Machine is a spiral push drill that is useful to drill holes in PCBs. The operation of this drill machine is simple. Simply pressing the body of the Drill downwards by holding the drill base will drill the PCB.
The drill supports a drilling range from 0 – 3mm which is adequate for almost all types of through-hole components. This drill is perfect for making PCBs at home and a must-have tool for DIY PCB makers.
Armsol PCB Hand Drills features and specifications:
- Spiral Type Hand Drill
- 0-3mm drills are accepted
- Easy to hold features
Armsol PCB Hand Drill Applications:
- Drilling PCBs
- Drilling small holes in ornaments and jewelry
Example on How to use PCB Hand drill:
Additional Resources:
Package Contains
1x Armsol PCB Hand Drill (Spiral Push)
Related products
Desoldering wick
Armsol Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.
Features and Specifications:- Solder Wick wire
- Length: 1 meter
- Material: 100% Copper
- Thickness: Comfortable for Desoldering
- RMA Coated Wick
- Useful for Faster and Cleaner electronics Desoldering work
Female to Female Jumper Wires
Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Ferric Chloride (Fe2Cl3) For PCB Etching
Ferric chloride is most commonly used for etching PCB boards. Mix the solvent with warm water and your etching solutions is ready. You can also store and reuse the solution.
Ferric Chloride Applications:
- Etching in Copper Clad Board
- Art using Copper Clad Board
Male to Female Jumper Wires
Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Male to Male Jumper Wires
Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Soldering sponge – Round 5cm X 5cm
Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning.
USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage.
Features: Round Sponge – Soldering sponge (5cm X 5cm)
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Soldering sponge 5.5cm X 7cm
Soldering Sponge - Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple-time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning.
Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
Features: Soldering Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Reviews
There are no reviews yet.