-
-
ACCESSORIES
Female to Female Jumper Wires
Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Soldering sponge 5.5cm X 7cm
Soldering Sponge - Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple-time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures: Soldering Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Male to Male Jumper Wires
Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Male to Female Jumper Wires
Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Soldering sponge – Round 5cm X 5cm
Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage. Features: Round Sponge – Soldering sponge (5cm X 5cm)- Easy to maintain
- Absorbs dirt and water
- Fine spores
-
-
-
-
-
-
25 watt soldering iron bit (Pointed Tip)
If you're in need of a high-quality soldering iron tip for micro soldering, look no further than the Armsol 25W Nickel Plated Pointed 3mm Soldering Gun Bit! This 25W pointed tip features nickel plating and 3mm width, providing precise and reliable performance for your micro soldering needs. In addition, it's specifically designed to be used with Armsol 25W soldering irons, making it a perfect fit. By investing in a new soldering tip, you'll notice faster and more efficient solder joints, making the whole process more enjoyable. This tip fits all analog and digital irons and takes only 30 seconds to change out. All the tips are good for either lead or lead-free (simply set the iron to the temperature required for the solder you are using).
Features: 25 Watt Soldering Iron Bit (Pointed)
- Material: Plated with Nickel, Durable and Long Life
- Slide-on technology for tip replacement
- Suitable for soldering light gauze wires, thin metals, and hobby work
- working temperature: Reaches in 2 minutes
- Power: 25 watts, Operating Voltage: 220 volts
- Pin Head: Round Pinpointed
25 watt Soldering Iron Bit (Spade)
25-watt Soldering Iron Bit (Spade)
The Armsol 25-Watt Soldering Iron bit is made with a nickel-plated spade (3mm) which will enhance your soldering experience. The Soldering bit is a High-Quality Soldering Iron Tip. This tip fits in all analog and digital irons, and switching them out simply takes 30 seconds. Each tip works for both lead-based and lead-free products (simply set the iron to the temperature required for the solder you are using).Features: 25 Watt Soldering Iron Bit (Spade)
- 25 Watt Power rating
- Plated with Nickel
- Durable and Long Life
- Slide-on technology for tip replacement
25 Watt Soldering Iron Bit Ceramic (Pointed Tip)
25 Watt Soldering Iron Bit Ceramic (Pointed Tip)
ARMSOL Ceramic Coated bit for 25-watt Soldering Iron features a ceramic coating with a pointed tip and 3mm width, providing precise and reliable performance for your soldering needs. Plus, it's specifically designed to be used with 25 Watt soldering irons, ensuring the perfect fit and optimal results. Armsol Soldering Irons work best with Armsol spares and accessories. Buy various Soldering Accessories from our Product range. Specification: 25-watt soldering Iron Bit Ceramic (pointed tip)- Manufacturer: Armsol
- Wattage: 25w
- Plated: Ceramic Coated
35 watt soldering iron
35-watt Soldering iron - The ARMSOL ASL-35WT soldering iron is perfect for hobbyists and featuring an ergonomic design with heavy-duty construction, as well as a 6-month warranty. With 35 watts of power, this soldering iron heats up quickly for low-heat soldering applications. Ideal for simple electronics and electrical assembly work and is a top choice for electrical engineers, electronics repairers, students, and hobbyists. Trust ARMSOL, the best in the market, for all your soldering needs in Mumbai.
| Brand | ARMSOL |
| Model Number | ASL-35W/230V |
| Power Consumption | 30W |
| Power Source | 230V AC |
| Cable Length | 1.5 Meter |
| Country of Origin | Made in India |
| Warranty | 6 Months |
35 watt Soldering Iron Bit
35-watt Soldering Iron Bit - Looking for a high-quality soldering iron tip that can take your soldering experience to the next level?
Check out the Armsol Nickel Plated Spade (3mm) 35-Watt Soldering Iron Bit! This tip is specially designed to be used with the Armsol 35 Watt soldering iron, and features a bevel design and a 35-watt power rating for quick and efficient soldering.
Features: 35 Watt Soldering Iron Bit
- The power rating is 35W
- Plated with Nickel
- Durable and Long Life
- Slide-on technology for tip replacement
50 watt Soldering Iron
50 watts/230 volts Soldering Iron: The ARMSOL ASL-50WT soldering iron is perfect for hobbyists and features an ergonomic design with heavy-duty construction, as well as a 6-month warranty. With 50 watts of power, this soldering iron heats up quickly for low-heat soldering applications. Ideal for simple electronics and electrical assembly work and is a top choice for electrical engineers, electronics repairers, students, and hobbyists. Trust ARMSOL, the best in the market, for all your soldering needs in Mumbai.
| Brand | ARMSOL |
| Model Number | ASL-50W/230V |
| Adjustable Temperature | NO |
| Power Source | 230V AC |
| Cable Length | 1.5 Meter |
| Country of Origin | Made in India |
| Warranty | 6 Months |
Armsol Tweezers – Pack of 10
Armsol tweezers set has 10 different specifications and configurations of tweezers, meeting your different needs. It can be widely applied to PCB repair, watch repair, craft, jewelry, electronics, laboratory work, and so on. ?
Perfectly suitable for electronics repairing. ? High Elasticity.
Reduce Work Gatigue --- Adopt an ergonomic design that takes a moderate elastic tip to ensure a firm exact and reduce work fatigue. Coming with a Handy case --- All precision tweezers keep in a handy bag to avoid losing,
Easy to carry. Each tweezer comes with a protective cover to avoid scratching or protect you from damage.
Breadboard 400 point
BreadBoard with 400 Tie Points - Looking to build a circuit without the hassle of soldering? Armsol Solderless Breadboard – 400 points is the perfect solution! With a variety of connection points, the breadboard allows for easy prototyping and experimentation. Armsol offers a range of solderless breadboards at a competitive price. Whether you're a hobbyist or a professional, our breadboards are perfect for your next project. Check out our selection and buy a solderless breadboard today.
Breadboard specifications
- Tie Points - 400
- Color - White
- Power lanes - 2
- Total tie points in Double strip - 300
Breadboard 830 Tie point
BreadBoard with 830 Tie Points - Looking to build a circuit without the hassle of soldering? Armsol Solderless Breadboard – 830 points is the perfect solution! With a variety of connection points, the breadboard allows for easy prototyping and experimentation. Armsol offers a range of solderless breadboards at a competitive price. Whether you're a hobbyist or a professional, our breadboards are perfect for your next project. Check out our selection and buy a solderless breadboard today.
Breadboard specifications
- Tie Points - 830
- Color - White
- Power lanes - 2
- Total tie points in Double strip - 630
NOTE: The breadboard is slightly concave at the base.
Cutter – Wire stripper
Armsol ASL-109 Alloy Steel Wire Stripper and Cutter is a unique stripper and cutter which is suitable for the cutting of Aluminum and Copper wires. This small cutter comes with a long wire cutter and can cut wire up to a dia of 3mm, this mini cutter consists of cushion sleeves which provide comfort for the continuous working over the tools. This Small cutter is duly polished with extremely well-finished cutting edges. Small Cutter ASL - 109 finds application in electronic, telecommunication, automobile, printed circuit board & assembly industries. Our provided cutter has soft cushioned grips for comfortable work.
Features: Wire stripper and cutter
- Made of high-quality material
- Suitable for cutting Aluminium and Copper
- Cuts wire up to a diameter of 3mm
- Fully Polished
- Well finished cutting edges
Desoldering Pump
The Armsol Desoldering pump, which is also known as a solder sucker, is a manually-operated device that is used to remove solder from a printed circuit board. The Armsol Imported Desoldering Pump is Ideal for removing heated solder from a PCB. It is a durable and full metal body desoldering pump. This Blue Desoldering Pump is a high-quality product that has good Desoldering capability due to strong suction and durable build.
Specification - Desol Pump (Imported)
| Brand | Armsol |
| Warranty | 1 Year |
| Model Name/Number | Desol-Pump Imported |
| Material | ABS |
| Weight | 70gm |
