TESTED BY MANY TRUSTED BY ALL...
Browse Categories
  • Menu Icon ArmsolSoldering Iron
    • Soldering Iron 25 watt
    • 35 watt soldering iron
    • 50 watt Soldering Iron
  • Menu Icon ArmsolSoldering Bits
    • 25 watt Soldering Iron Bit (Spade)
    • Soldering Bit 25w Ceramic (Spade)
    • 25 watt soldering iron bit (Pointed Tip)
    • Soldering Bit 25w Ceramic – Pointed Tip
    • 35 watt Soldering Iron Bit
    • Soldering Iron Bit 50w
  • Menu Icon ArmsolAccessories
    Jumper Wire Banner
    3 products

    Jumper Wire

    View More
    PCB Etching
    Ferric Chloride

    PCB Etching

    VIEW MORE
    Sponge
    3 Products

    Sponge

    VIEW MORE
    ACCESSORIES
    • New
    • Sponge
    • Jumper Wire
    Male to Male Jumper Wires

    Male to Male Jumper Wires

    Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
    Read more
    ENQUIRY!
    Quick view
    Female to female Jumper Wire

    Female to Female Jumper Wires

    Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
    Read more
    ENQUIRY!
    Quick view
    Male to Female Jumper Wires

    Male to Female Jumper Wires

    Male to Female Jumper Wires (20cm),  A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
    Read more
    ENQUIRY!
    Quick view
    Soldering Sponge (5.5cm x 7cm)

    Soldering sponge 5.5cm X 7cm

    ₹22.00
    Soldering Sponge - Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple-time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
    Features: Soldering Sponge - 5.5cm X 7cm
    • Easy to maintain
    • Absorbs dirt and water
    • Fine spores
    Add to cart
    ENQUIRY!
    Quick view

    Soldering sponge – Round 5cm X 5cm

    ₹15.00
    Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage. Features: Round Sponge – Soldering sponge (5cm X 5cm)
    • Easy to maintain
    • Absorbs dirt and water
    • Fine spores
    Add to cart
    ENQUIRY!
    Quick view
    Soldering Sponge

    Soldering sponge – Rectangle Sponge 3.5cm X 5cm

    ₹22.00
    Soldering sponge - Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple-time usage. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
    Features: Rectangle Sponge - 3.5cm X 5cm
    • Easy to maintain
    • Absorbs dirt and water
    • Fine spores
    Add to cart
    ENQUIRY!
    Quick view
  • Menu Icon ArmsolSoldering Iron Stand
    • Soldering Iron Stand (Circular )
    • Soldering Iron Stand (Square)
    • Soldering Iron Stand (Rectangular)
  • Menu Icon ArmsolTweezers
    • Armsol Tweezers – Pack of 10
    • ESD Tweezer Straight
    • Soldering Tweezers – Straight
    • ESD Tweezer Bend
    • Soldering Tweezers – Bend
  • Menu Icon ArmsolCutter/Nipper
    • Stainless Steel Cutter (SS Cutter)
    • Small Cutter – Wire stripper and cutter
    • Nipper – Micro Nipper
  • Menu Icon ArmsolDesoldering Pump
    • Desoldering Pump – Metallic Body Desol Pump
    • Desoldering Pump – Imported
    • Goot Desoldering Pump – GS100
  • Menu Icon ArmsolPaste -Flux -Tip Tinner
    • Liquid Flux
    • Tip Tinner
    • Soldering Paste
  • Menu Icon ArmsolBreadBoard
    • Solderless Breadboard – 400 point
    • Solderless Breadboard 830 Tie point
  • Soldering iron element
    • Soldering Iron Element 50W
    • 35W Soldering Iron Element
    • Soldering Iron Element – 25 watt
Armsol Logo Armsol Logo
  • Home
  • About Us
  • Shop
  • Blog
  • Contact US
Login / Register
Sign inCreate an Account

Lost your password?

Search
0 items / ₹0.00
Menu
Armsol Armsol
Login / Register
0 items ₹0.00
Ferric Chloride (Fe2Cl3) For PCB Etching
Ferric Chloride (Fe2Cl3) For PCB Etching
Click to enlarge
Ferric Chloride (Fe2Cl3) For PCB Etching
Ferric Chloride (Fe2Cl3) For PCB Etching
Home Shop Soldering Accessories Ferric Chloride (Fe2Cl3) For PCB Etching
Breadboard-830-points-with-metal-plate
Solderless Breadboard 830 Tie point ₹100.00
Back to products
Male to Male Jumper Wires
Male to Male Jumper Wires

Ferric Chloride (Fe2Cl3) For PCB Etching

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Ferric chloride is most commonly used for etching PCB boards. Mix the solvent with warm water and your etching solutions is ready. You can also store and reuse the solution.

Why ferric chloride is used in PCB etching?
Ferric chloride is a corrosive, acidic chemical compound that will eat away all copper on the board that is not protected by the marker’s ink. Pour a modest amount of ferric chloride into a plastic container with a lid; just enough to cover the board completely.

Ferric Chloride Applications:

  • Etching in Copper Clad Board
  • Art using Copper Clad Board
ENQUIRY!
Category: Soldering Accessories
Share:
  • Description
Description

In Electronics, PCB Design is an essential part but ordering a PCB and getting it on time is a difficult one, especially for rapid prototyping purposes. Here comes the Ferric Chloride handy as it is useful to make hand-made PCB in no time.

This Ferric Chloride is an essential industry-grade chemical that is useful for PCB etching in a proper way without the corrosion on the connection routing. Use the right amount of ferric chloride and inadequate hot water and make PCB from copper-clad boards. Does not matter if it is single-sided or double-sided.

Specifications:

  • Quantity (powder): 60gms (when packed)
  • FERRIC CHLORIDE (ANHYDROUS)
  • Structural Formula: FeCl3
  • Molecular Weight: 162.5 gm/mole
  • Physical Appearance: Greenish to Black crystalline powder
  • Purity: 98.00%
  • Fe% : 33 Min
  • Insoluble in water: 0.5% Max
  • Moisture: 1.00% Max
  • Fecl2 salt: 0.10% Max
  • Net Weight: 50gm

Ferric Chloride Applications:

  • Etching in Copper Clad Board
  • Art using Copper Clad Board

Precaution and Safety:

  • Use hand gloves during usage
  • Keep out of reach of children
  • Wear a smoke mask as the produced gas is dangerous to health
  • Keep your eyes well covered using glasses
  • Do not moisturize the container and store it in a cool and dry place.

 

Ferric Chloride is the ideal solution for making hand-made PCB in a quick and efficient manner. This high-quality chemical is required for PCB etching and ensures proper routing without corrosion. You can easily create PCB from copper-clad boards, whether single or double-sided, with the right amount of ferric chloride and hot water. Armsol provides high-quality ferric chloride for PCB etching powder to ensure the best possible results. Our ferric chloride is specifically designed for use in electronics and PCB design, making it an excellent choice for rapid prototyping. You can rely on our ferric chloride to deliver exceptional results every time due to its powerful etching properties and ability to keep the color of your PCB.

So, look no further than our ferric chloride for PCB etching powder and solution if you want to quickly and effectively create high-quality PCB. With our premium products, you can be confident in the reliability and durability of your PCBs, allowing you to focus on your design and development.

For your next PCB project, place an order right away and benefit from using ferric chloride.

FAQs for ferric chloride for etching:

Q-1 How to use ferric chloride for etching?

Ferric chloride is used to etch metals such as copper and brass. To use ferric chloride for etching, clean the metal and apply a resist to protect the areas you don’t want to etch. Mix ferric chloride with water and submerge the metal in the solution, agitating it occasionally. Monitor the progress and remove the metal once the desired depth of etching is achieved. Rinse the metal and remove the resist to reveal the etched design. Be sure to follow the manufacturer’s instructions for handling and disposing of ferric chloride, as it can be harmful to skin, eyes, and clothing.

Ferric Chloride usage for PCB Etching

Q-2 Why ferric chloride is used in PCB etching?

Ferric chloride is a corrosive, acidic chemical compound that will eat away all copper on the board that is not protected by the marker’s ink. Pour a modest amount of ferric chloride into a plastic container with a lid; just enough to cover the board completely.

How to use Ferric Chloride For PCB Etching

Ferric Chloride usage for PCB Etching

Additional Resources:

DIY Toner transfer in PCBs

Package Contains

1x 50gm Ferric chloride powder

Note: High corrosive chemical, caution!! Harmful to skin and eyes. Please make sure all precautionary measure are in place like hand gloves, glasses etc.

 

1 review for Ferric Chloride (Fe2Cl3) For PCB Etching

  1. player – June 30, 2022

    Rated 5 out of 5

    Τhanks for finally talking about > PCB Etching Solution Powder – For
    DIY PCB Making Ferric | Armsol.in < Liked it!

Add a review Cancel reply

Your email address will not be published. Required fields are marked *

Related products

Armsol PCB hand Drills
PCB Hand Drills

PCB Hand Drill

Armsol PCB Hand Drills - Sprral Push Drills  A Small Hand Drill which Is operated by depressing the body of the Drill Downwards. Generally used for PCB drilling and all small drilling in the range of 0 - 2.0 mm
Handmade PCBs are common in electronics but drilling the component holes in PCB is essential and troublesome. However, this PCB Hand Held Drill Machine is a spiral push drill that is useful to drill holes in PCBs. The operation of this drill machine is simple.This drill is perfect for making PCBs at home.
Read more
ENQUIRY!
Quick view
Male to Male Jumper Wires

Male to Male Jumper Wires

Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Read more
ENQUIRY!
Quick view
-40%

Desoldering pump nozzle

₹50.00 ₹30.00
Desoldering Nozzle ** Note: Compatible with Original ARMSOL desoldering pump only

Specifications - Desoldering Nozzle

Attribute Value
Desoldering Tool Type Desoldering Nozzle
Nozzle Size 2mm
For Use With  Desoldering Gun
Add to cart
ENQUIRY!
Quick view

Soldering sponge – Round 5cm X 5cm

₹15.00
Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage. Features: Round Sponge – Soldering sponge (5cm X 5cm)
  • Easy to maintain
  • Absorbs dirt and water
  • Fine spores
Add to cart
ENQUIRY!
Quick view
Female to female Jumper Wire

Female to Female Jumper Wires

Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Read more
ENQUIRY!
Quick view
Male to Female Jumper Wires

Male to Female Jumper Wires

Male to Female Jumper Wires (20cm),  A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Read more
ENQUIRY!
Quick view

Solder Wick wire

₹15.00
Armsol Solder wick is composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Hence, solder wick is sometimes called desolder braid. Yes, you really can solder anything, and solder wick is a large part of the process.

Features and Specifications:- Solder Wick wire

  • Length: 1 meter
  • Material: 100% Copper
  • Thickness: Comfortable for Desoldering
  • RMA Coated Wick
  • Useful for Faster and Cleaner electronics Desoldering work
Add to cart
ENQUIRY!
Quick view
Soldering Sponge

Soldering sponge – Rectangle Sponge 3.5cm X 5cm

₹22.00
Soldering sponge - Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple-time usage. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
Features: Rectangle Sponge - 3.5cm X 5cm
  • Easy to maintain
  • Absorbs dirt and water
  • Fine spores
Add to cart
ENQUIRY!
Quick view
CONTACT US

Address: 1/20,Shree Ganesh Bhuvan,Opp Dr.D.B.Marg police Station,357-Lamington Road,Mumbai 400007,Maharashtra, INDIA

Phone: 022 -3863549 | 022-23854510

Email: info@armsol.in

Useful links
  • Home
  • About Us
  • Shop
  • Blog
  • Contact US
Best sellers
  • Soldering Iron
  • Soldering Iron Bit
  • Tweezers
  • Soldering sponge
  • Tip Tinner
FOLLOW US

 

Facebook Armsol        Linkedin armsol        Instagram armsol

 

 

ARMSOL 2021 DESIGNED BY ComponentCart
  • Menu
  • Categories
  • Menu Icon ArmsolSoldering Iron
  • Menu Icon ArmsolSOLDERING IRON STAND
  • Menu Icon ArmsolSOLDERING IRON BIT
  • Menu Icon ArmsolCUTTER – NIPPER
  • Menu Icon ArmsolTWEEZERS
  • Menu Icon ArmsolDESOLDERING PUMPS
  • Soldering sponge
  • Menu Icon ArmsolPaste -Flux -Tip Tinner
  • Menu Icon ArmsolSoldering Iron
    • Soldering Iron 25 watt
    • 35 watt soldering iron
    • 50 watt Soldering Iron
  • Menu Icon ArmsolSoldering Bits
    • 25 watt Soldering Iron Bit (Spade)
    • Soldering Bit 25w Ceramic (Spade)
    • 25 watt soldering iron bit (Pointed Tip)
    • Soldering Bit 25w Ceramic – Pointed Tip
    • 35 watt Soldering Iron Bit
    • Soldering Iron Bit 50w
  • Menu Icon ArmsolAccessories
  • Menu Icon ArmsolSoldering Iron Stand
    • Soldering Iron Stand (Circular )
    • Soldering Iron Stand (Square)
    • Soldering Iron Stand (Rectangular)
  • Menu Icon ArmsolTweezers
    • Armsol Tweezers – Pack of 10
    • ESD Tweezer Straight
    • Soldering Tweezers – Straight
    • ESD Tweezer Bend
    • Soldering Tweezers – Bend
  • Menu Icon ArmsolCutter/Nipper
    • Stainless Steel Cutter (SS Cutter)
    • Small Cutter – Wire stripper and cutter
    • Nipper – Micro Nipper
  • Menu Icon ArmsolDesoldering Pump
    • Desoldering Pump – Metallic Body Desol Pump
    • Desoldering Pump – Imported
    • Goot Desoldering Pump – GS100
  • Menu Icon ArmsolPaste -Flux -Tip Tinner
    • Liquid Flux
    • Tip Tinner
    • Soldering Paste
  • Menu Icon ArmsolBreadBoard
    • Solderless Breadboard – 400 point
    • Solderless Breadboard 830 Tie point
  • Soldering iron element
    • Soldering Iron Element 50W
    • 35W Soldering Iron Element
    • Soldering Iron Element – 25 watt
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
Facebook Instagram linkedin
Start typing to see products you are looking for.

Product Enquiry