-
-
ACCESSORIES
Male to Male Jumper Wires
This is Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Rectangle Sponge 5.5cm X 7cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures:Rectangle Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Rectangle Sponge 3.5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures:Rectangle Sponge - 3.5cm X 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Round Sponge 5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures: Round Sponge - 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Female to Female Jumper Wires
This is 20CM Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Male to Female Jumper Wires
This is Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. -
-
-
-
-
-
Soldering Iron Stand (Circular )
A soldering iron stand keeps the Soldering iron away from flammable materials. This is a simple soldering iron stand holder composed of a detachable heavy-duty metal base, a reinforced spring holder, and a soldering wire holder. A nice home at the bottom of the base is for a rectangular cleaning sponge.ARMSOL Soldering stand has the capacity to withstand the weight of most of the Heavy Soldering Irons. This Soldering stand holder had a rectangular metal base. our in-house technical team has developed as per international standards. It can hold all types of soldering iron 25W to 75W.
| Brand | ARMSOL |
| Model Number | ASL-R-301 |
| Material | Metal |
| Product | Soldering Iron Holder (Circular) |
| Country of Origin | Made in India |
| Warranty | 6 Months |
Soldering Iron Stand (Rectangular)
A soldering iron stand keeps the Soldering iron away from flammable materials. This is a simple soldering iron stand holder composed of a detachable heavy-duty metal base, a reinforced spring holder, and a soldering wire holder. A nice home at the bottom of the base is for a rectangular cleaning sponge.ARMSOL Soldering stand has the capacity to withstand the weight of most of the Heavy Soldering Irons. This Soldering stand holder had a rectangular metal base. our in-house technical team has developed as per international standards. It can hold all types of soldering iron 25W to 75W.
| Brand | ARMSOL |
| Model Number | ASL-R-301 |
| Material | Metal |
| Product | Soldering Iron Holder |
| Country of Origin | Made in India |
| Warranty | 6 Months |
Soldering Iron Stand (Square)
A soldering iron stand keeps the Soldering iron away from flammable materials. This is a simple soldering stand holder composed of a detachable heavy-duty metal base, a reinforced spring holder, and a soldering wire holder. A nice home at the bottom of the base is for a rectangular cleaning sponge.ARMSOL Soldering stand has the capacity to withstand the weight of most of the Heavy Soldering Irons. This Soldering stand holder had a rectangular metal base. our in-house technical team has developed as per international standards. It can hold all types of soldering iron 25W to 75W.
| Brand | ARMSOL |
| Model Number | ASL-R-301 |
| Material | Metal |
| Product | Soldering Iron Holder Square |
| Country of Origin | Made in India |
| Warranty | 6 Months |
