-
-
ACCESSORIES
Soldering sponge – Round 5cm X 5cm
Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage. Features: Round Sponge – Soldering sponge (5cm X 5cm)- Easy to maintain
- Absorbs dirt and water
- Fine spores
Male to Male Jumper Wires
Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Soldering sponge 5.5cm X 7cm
Soldering Sponge - Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple-time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures: Soldering Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Male to Female Jumper Wires
Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Female to Female Jumper Wires
Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. -
-
-
-
-
-
25 watt soldering iron bit (Pointed Tip)
If you're in need of a high-quality soldering iron tip for micro soldering, look no further than the Armsol 25W Nickel Plated Pointed 3mm Soldering Gun Bit! This 25W pointed tip features nickel plating and 3mm width, providing precise and reliable performance for your micro soldering needs. In addition, it's specifically designed to be used with Armsol 25W soldering irons, making it a perfect fit. By investing in a new soldering tip, you'll notice faster and more efficient solder joints, making the whole process more enjoyable. This tip fits all analog and digital irons and takes only 30 seconds to change out. All the tips are good for either lead or lead-free (simply set the iron to the temperature required for the solder you are using).
Features: 25 Watt Soldering Iron Bit (Pointed)
- Material: Plated with Nickel, Durable and Long Life
- Slide-on technology for tip replacement
- Suitable for soldering light gauze wires, thin metals, and hobby work
- working temperature: Reaches in 2 minutes
- Power: 25 watts, Operating Voltage: 220 volts
- Pin Head: Round Pinpointed
25 watt Soldering Iron Bit (Spade)
25-watt Soldering Iron Bit (Spade)
The Armsol 25-Watt Soldering Iron bit is made with a nickel-plated spade (3mm) which will enhance your soldering experience. The Soldering bit is a High-Quality Soldering Iron Tip. This tip fits in all analog and digital irons, and switching them out simply takes 30 seconds. Each tip works for both lead-based and lead-free products (simply set the iron to the temperature required for the solder you are using).Features: 25 Watt Soldering Iron Bit (Spade)
- 25 Watt Power rating
- Plated with Nickel
- Durable and Long Life
- Slide-on technology for tip replacement
25 Watt Soldering Iron Bit Ceramic (Pointed Tip)
25 Watt Soldering Iron Bit Ceramic (Pointed Tip)
ARMSOL Ceramic Coated bit for 25-watt Soldering Iron features a ceramic coating with a pointed tip and 3mm width, providing precise and reliable performance for your soldering needs. Plus, it's specifically designed to be used with 25 Watt soldering irons, ensuring the perfect fit and optimal results. Armsol Soldering Irons work best with Armsol spares and accessories. Buy various Soldering Accessories from our Product range. Specification: 25-watt soldering Iron Bit Ceramic (pointed tip)- Manufacturer: Armsol
- Wattage: 25w
- Plated: Ceramic Coated
35 watt Soldering Iron Bit
35-watt Soldering Iron Bit - Looking for a high-quality soldering iron tip that can take your soldering experience to the next level?
Check out the Armsol Nickel Plated Spade (3mm) 35-Watt Soldering Iron Bit! This tip is specially designed to be used with the Armsol 35 Watt soldering iron, and features a bevel design and a 35-watt power rating for quick and efficient soldering.
Features: 35 Watt Soldering Iron Bit
- The power rating is 35W
- Plated with Nickel
- Durable and Long Life
- Slide-on technology for tip replacement
Soldering Bit 25w Ceramic (Spade)
Soldering Bit 25w Ceramic (Spade)
The ARMSOL 25 Watt Ceramic Coated bit! This chisel tip features a ceramic coating and 3mm width, providing precise and reliable performance for your soldering needs. Plus, it's specifically designed to be used with 25 Watt soldering irons, ensuring the perfect fit and optimal results. Armsol Soldering Irons work best with Armsol spares and accessories. Buy various Soldering Accessories from our Product range. Features: Soldering Bit 25w Ceramic- The power rating is 25W
- Coated with Ceramic
- Durable and Long Life.
- Slide-on technology for tip replacement.
Soldering Iron Bit 50w
Check out the Armsol Nickel Plated (7mm) 50 Watt Soldering Iron Bit! This tip is specially designed to be used with the Armsol 50 Watt soldering iron, and features a bevel design and a 50-watt power rating for quick and efficient soldering.
Features: 50-watt Soldering Iron Bit
- The power rating is 50W
- Plated with Nickel
- Durable and Long Life
- Slide-on technology for tip replacement
Soldering Iron Bit (Soldering Iron Tip) is a High-Quality Soldering Iron Tip. These are Nickel Plated With Chisel tip; it can be used with any standard soldering iron.
Upgrade your soldering gun with a new tip, you’ll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits all analog and digital irons, and they’re fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead-free
(simply set the iron to the temperature required for the solder you are using).
Features :
- High-Quality Original Armsol Soldering Bit.
- Slide-on technology for TIP replacement.
- Compatible with All Brands Guns.
