-
-
ACCESSORIES
Male to Male Jumper Wires
This is Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Round Sponge 5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures: Round Sponge - 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Male to Female Jumper Wires
This is Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Female to Female Jumper Wires
This is 20CM Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Rectangle Sponge 3.5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures:Rectangle Sponge - 3.5cm X 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Rectangle Sponge 5.5cm X 7cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage. High-quality solder sponge. Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures:Rectangle Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
-
-
-
-
-
-
Soldering Accessories
Female to Female Jumper Wires
This is 20CM Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Ferric Chloride (Fe2Cl3) For PCB Etching
Ferric chloride is most commonly used for etching PCB boards. Mix the solvent with warm water and your etching solutions is ready. You can also store and re-use the solution.
Ferric chloride is a corrosive, acidic chemical compound that will eat away all copper on the board that is not protected by the marker's ink. Pour a modest amount of ferric chloride into a plastic container with a lid; just enough to cover the board completely.
Male to Female Jumper Wires
This is Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Male to Male Jumper Wires
This is Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.
Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.
Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development board. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
PCB Hand Drill
Handmade PCBs are common in electronics but drilling the component holes in PCB is essential and troublesome. However, this PCB Hand Held Drill Machine is a spiral push drill that is useful to drill holes in PCBs. The operation of this drill machine is simple.This drill is perfect for making PCBs at home.
Rectangle Sponge 3.5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage.
High-quality solder sponge.
Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
Features:Rectangle Sponge - 3.5cm X 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Rectangle Sponge 5.5cm X 7cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage.
High-quality solder sponge.
Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
Features:Rectangle Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Round Sponge 5cm X 5cm – Soldering sponge
Soldering Iron Tip/Bit Cleaning Sponge - With the assistance of skilled and experienced professionals, Armsol offers its clients a wide array of Solder Iron Bit Cleaning Sponges. We offer them in different sizes and are easy to maintain. They have fine pores that absorb dirt and water through capillary action. We source the entire product range from certified vendors of the industry. Generally used for cleaning soldering tips. Good quality with high stability, long last for extensive multiple time usage.
High-quality solder sponge.
Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting water
Features: Round Sponge - 5cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
