- ACCESSORIES
Male to Female Jumper Wires
Male to Female Jumper Wires (20cm), A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin male to 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Female to Female Jumper Wires
Female to Female Breadboard Jumper Dupont 2.54MM 1P-1P Cable 40 Pcs. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment.Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Male to Male Jumper Wires
Male to Male Jumper Wires (20cm) - 40 Pieces pack. A very flexible and easily detachable cable to the no. of wires according to your requirement. It has a 1Pin male to 1-Pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering.Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again.
Soldering sponge – Round 5cm X 5cm
Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning.USE: To ensure optimal performance, it is recommended to spray a small amount of water on the solder sponge before use. Our high-quality soldering sponge is designed to swell when it comes into contact with water, allowing for efficient cleaning of soldering tips and extended usage.Features: Round Sponge – Soldering sponge (5cm X 5cm)- Easy to maintain
- Absorbs dirt and water
- Fine spores
Soldering sponge 5.5cm X 7cm
Soldering Sponge - Armsol offers high-quality Soldering Iron Tip/Bit Cleaning Sponges for cleaning soldering tips. Our sponges are designed with fine pores that use capillary action to absorb dirt and water, ensuring that your soldering iron bit is thoroughly cleaned every time. We offer these sponges in a variety of sizes to meet your needs, and they are simple to clean. Our products are sourced from industry-certified vendors, ensuring that you receive only the highest quality. Our soldering sponges, with their high stability and long-lasting multiple-time usage, are the ideal solution for anyone looking for a dependable and high-quality solder bit cleaner. You can rely on Armsol to provide you with the best sponge for soldering iron cleaning.Use: Spray a little water on the solder sponge before use, the sponge will swell when meeting waterFeatures: Soldering Sponge - 5.5cm X 7cm
- Easy to maintain
- Absorbs dirt and water
- Fine spores
Desoldering Pump
Armsol Desoldering pump, which is also known as a solder sucker, is a manually-operated device that is used to remove solder from a printed circuit board. The Armsol Imported Desoldering Pump is Ideal for removing heated solder from a PCB. It is a durable and full metal body desoldering pump. This Blue Desoldering Pump is a high-quality product that has good Desoldering capability due to strong suction and durable build.
Specification - Desol Pump (Imported)
| Brand | Armsol |
| Warranty | 1 Year |
| Model Name/Number | Desol-Pump Imported |
| Material | ABS |
| Weight | 70gm |
Desoldering Pump – Metal body
The Armsol Metallic Desol Pump, is a durable and efficient solder removal device. Which is a manually-operated desoldering pump, also known as a solder sucker, effortlessly extracts heated solder from PCB. It ensures exceptional desoldering performance with its strong suction and durable metal body. It is durable and dependable, withstanding repeated usage without losing effectiveness. This top-notch tool makes solder removal simple for both professionals and DIY enthusiasts. For simple and efficient desoldering, upgrade your toolkit with the Armsol Metallic Desol Pump.
Specification - Desol Pump (Metallic Body)
| Brand | Armsol |
| Warranty | 1 Year |
| Model Name/Number | Desol-Pump |
| Material | ABS |
| Weight | 70gm |
Goot®Desoldering Pump GS-100
The Goot® Soldering Pump, also known as a solder sucker, is a manually-operated device specifically designed for removing solder from printed circuit boards. It provides a reliable and efficient solution for desoldering tasks. The new brand Goot® Soldering Pump, a high-quality manual soldering sucker plunger designed for efficient solder removal. Made in Japan, this Goot pump is renowned for its reliability and performance.
| Brand | Goot |
| Model Name/Number | GS-100 |
| Weight | 89g |
| Length | 330mm |
| Color | Ivory |
| When Stored | 240mm |
DESOLDERING PUMPS
